SAINT-GOBAIN GLASS

SGG Planilaque Evolution can only be used in interior applications and must follow the current national rules and regulations.

SGG Planilaque Evolution can be glazed

Mechanically, into glazing channels trim or with appropriate fixing screws

Adhesively, using neutral translucent silicone adhesives, or double sided tape. To check whether the adhesives work with SGG Planilaque Evolution, test its reaction with the lacquer

SGG Planilaque evolution must not be fixed directly in front of or behind a strong source of heat e.g. cooker, microwave

Maintenance

Clean regularly with soft, clean cloth and regular glass cleaning product (neutral and soft).

Tips for successful installation

Install the product in front of a non transparent surface, with the lacquered face towards the wall

Fix the lacquered glass on a supporting wall or a surface that is flat, clean, dry and free of aggressive agents

Place the light coloured lacquered glasses in front of a uniformly pale surface

Avoid placing the glass close to a high heat source. If used near a heater for example, the temperature of the wall must not exceed 45oC

In kitchens, do not allow the glass to come in to direct contact with flames or strong heat source e.g. ovens, cooker hobs, very hot utensils or pans

Allow a gap of 1-2 mm between the edges of two glass panels

Ensure that moisture is not allowed to collect behind the glass, either by allowing sufficient drainage and ventilation, or by sealing the area with suitable material