Saint-Gobain Glass introduces Planisafe, India's first free-standing coloured & lacquered laminated glass. Being laminated on both sides makes Planisafe a highly durable and safe glass that has been tested in adherence to the most stringent test parameters for breakage and safety. It is ideally suited for a wide variety of applications where safety assumes paramount importance.

Applications in Interior Design

Partitions -
  1. Office
  2. Washroom
  3. Fitting rooms
  4. Houses
Sliding Doors
Table Tops
Work station partitions


The double-sided lamination lends safety to Planisafe. Even in the rare event of a breakage, the fragments stick to the interlayers and do not get scattered.
Planisafe is made to undergo rigorous tests and is certified for being durable enough to withstand extreme conditions.
Acoustic comfort
Planisafe has an acoustically superior performance and is well-suited for applications that demand a high level of acoustic comfort.
Planisafe is lead-free and has only minimal amounts of VOC, copper, formaldehyde and arsenic, making it an environmentally safe glass.
Hassle-free maintenance
Hygienic, resistant to heat & humidity, scratch-proof and moisture-proof, Planisafe is an easy to maintain glass.

The Space Saver

Planisafe is designed to be a space saver and creates ample room wherever it is used. Because it is a free-standing glass, it does not require a base such as a gypsum board or a plywood for support. It can be directly installed, without the worry of surface levelling and other issues one would normally face while installing glass. This helps in reducing the thickness of the surface significantly, and in turn, helps to give more open space.


Planisafe comes in 15 attractive colors that make it possible to use diverse colours for different sides of the wall. Hence it can be used to synchronize the partition with the décor of each room.


Product Thickness Size in MM
Ultra White 4 2440*1220
6 2440*1790
Extra White/ Ivory 4 3210*1790
6 3210*1790
8 3210*1790
Colors 4 2440*1790
6 2440*1790
8 3050*1790

**Please check with Saint-Gobain Glass representative on further details and availability..


Planisafe has been tested for breakage, humidity and other defects and found to comply with the highest safety standards.

ENI2600 Pendulum Test :
The pendulum impact test has been set to classify glass with respect to its resistance to a soft body impact load and its safe breakage thereafter

Eni2543 Brake Test :
Baking test is the only quantitative test that helps in giving an early warning of changes in laminate quality of laminated safety glass. This involves subjecting the glass to up to 16 hours exposure to 1000C**.The glass is deemed ok if there are no defects or bubbles (up to 15mm from the edge).
ENI2543 High Humidity Test :
The purpose of this test is to determine whether laminated safety glass will withstand the effects of humidity in the atmosphere over an extended period of time, without its properties becoming sustainability altered. This involves subjecting the glass to up 14 days exposure at 500C with 80% relative humidity***. The glass is deemed ok if no defects in the glass (up to 15mm from the edge).

© Saint-Gobain Glass. All Rights Reserved.   |   Privacy Policy